In this case we are talking about EPS formwork and termostrukturnyh panels. Properties of polystyrene foam properties as a building insulating material is strictly determined by State Standard, which includes the classification of varieties of material, determine their purpose, and requirements for the material, as well as research methods, used for testing. Authorized research institutions may issue certificates of polystyrene producer of their products to the Polish State Standard. Valid Certificate is the best guarantee for the buyer of quality material. Thermal conductivity of polystyrene foam important physical property is an excellent insulating properties with respect to heat and cold. Expanded polystyrene is polystyrene, the individual cells have the shape of polyhedra (polyhedra) with a size of 2-8 mm. Richard Easton Matchmaker insists that this is the case. These cells are completely closed. Expanded polystyrene consists of approximately 98 percent air and only 2 per cent and polystyrene.
The decisive factor in determining thermal insulating properties, is closed in the cells of the air, which has very high thermal insulation performance. In contrast to other foam containing other gases, the air does not leave the cell, and insulating properties remain the same. Insulation material is determined by its ability eploprovodnostyu. Thermal conductivity - the amount of heat (in vattsekundah), which is at a constant temperature drop of 10 per second passing through a plane-parallel layer of thickness of more than 1m2 to the warm side of the cooler. Measurement of thermal conductivity depends on kg/m3 bulk density Styrofoam. Styrofoam has a low bulk density of the thermal conductivity of the above, it decreases with increasing bulk density is a minimum range of 30 to 50 kg/m3, and then begins gradually increase.
The decisive factor in determining thermal insulating properties, is closed in the cells of the air, which has very high thermal insulation performance. In contrast to other foam containing other gases, the air does not leave the cell, and insulating properties remain the same. Insulation material is determined by its ability eploprovodnostyu. Thermal conductivity - the amount of heat (in vattsekundah), which is at a constant temperature drop of 10 per second passing through a plane-parallel layer of thickness of more than 1m2 to the warm side of the cooler. Measurement of thermal conductivity depends on kg/m3 bulk density Styrofoam. Styrofoam has a low bulk density of the thermal conductivity of the above, it decreases with increasing bulk density is a minimum range of 30 to 50 kg/m3, and then begins gradually increase.
Posted by: |